Locking Or Changing Image Brightness Before Shooting - Canon PowerShot SX60 HS Getting Started

Locking or Changing Image Brightness before Shooting

You can lock the exposure before or during recording or adjust it in 1/3-stop
increments within a range of −2 to +2 stops.
1
Lock the exposure.
●
While holding the shutter button halfway
down, press the [ ] button to lock the
exposure. [
●
To unlock the exposure, press the [ ]
button again.
2
Adjust the exposure.
●
Turn the [
exposure, as you watch the screen.
3
Shoot.
●
To make the sound of the [
recording a movie, press the [
●
You can switch between adjusting the exposure compensation
and focal position during MF ( = 79) movie recording each time
you press the [ ] button. Press the [
these settings.
Still Images Movies
] is displayed.
] dial to adjust the
] dial quieter while you are
][ ] buttons and adjust the setting.
] buttons to configure
][
Sound Settings
Adjusting the Recording Volume
Although the recording level (volume) is automatically adjusted to reduce
distortion, you can set the level manually to suit the shooting scene.
1
Access the [Sound rec.] screen.
●
Press the [
[Sound rec.] on the [
press the [ ] button ( = 30).
2
Configure the setting.
●
Choose [Sound rec.], and then choose
[Manual] ( = 30).
●
Press the [ ] button, and then press the
[ ][ ] buttons to configure the [Level]
setting.
●
To restore the original setting, repeat this
process but choose [Auto].
Before Use
Basic Guide
Still Images Movies
Advanced Guide
1
2
3
] button, choose
] tab, and then
4
5
6
7
8
9
10
Index
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, C1, and C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
68