Environmental Settings - Canon imageFORMULA DR-F120 User Manual

Environmental Settings

To configure the environmental settings of CaptureOnTouch, open
the [Environmental settings] dialog box.
Click (CaptureOnTouch icon) in the taskbar, and select
[Environmental settings] from the menu.
The following describes the setting items of each tab displayed in
the [Environmental settings] dialog box.
[Basic settings] Tab
On the [Basic settings] tab, configure the following settings.
Launch method setting
By default, CaptureOnTouch becomes resident in the system when
you start your computer. Clear the [Make CaptureOnTouch resident]
check box to not make CaptureOnTouch resident in the system.
Display
Select the [CaptureOnTouch appears when the scanner is
connected] checkbox to open the main screen of CaptureOnTouch
automatically when the scanner is connected to the computer. This
setting is only enabled when CaptureOnTouch is running (or
resident in the system).
When this setting is enabled, the [Do not display the main screen
when the scan is started with the scanner button] setting is disabled.
If the [Do not display the main screen when the scan is started with
the scanner button] check box is selected, the main screen of
CaptureOnTouch is not displayed when the Scanning Shortcut
scanning is started by pressing the scanner's Start button. However,
dialogs and error messages during scanning and the pop-up screen
when the scan is completed will be displayed.
When this setting is enabled, the [Enable additional scan] and [Edit
after scanning] check boxes on the Edit Scanning Shortcut settings
screen are disabled.
Back Up / Restore
Use the [Back Up] and [Restore] buttons to back up the
configuration file (settings, registered jobs, etc.) of CaptureOnTouch
and restore the settings from the backup data.
[Back Up] button
Back up the settings of CaptureOnTouch to a backup file (*.cot). You
can store the initial settings of CaptureOnTouch by performing a
backup before you first use CaptureOnTouch.
[Restore] button
Restore the settings from the backup file.
When using multiple computers, you can back up the environmental
settings of one computer and then perform a restore on the other
computers so that all of the computers have the same settings.
45