Scanning With Start Button - Canon imageFORMULA DR-F120 User Manual

If [Edit after scanning] is disabled in the scanning shortcut settings,
the edit window will not be displayed.
Click the [ ] button to edit the output settings. -> "Setting the output"
Click the [Cancel] button to discard the scanned image and return to the
main window.
When the output has finished, a popup window will be displayed. If
saving the scanned image, a link to open the save destination folder
will be displayed.
This completes the shortcut scans.
If you click [Open storage folder], the folder in which the saved
scanned images were saved opens. Depending on the output
settings, the [Open storage folder] button may not be displayed.

Scanning with Start Button

"Scanning shortcuts" are allocated to the scanner start button in
advance.
You can set frequently-used scans to the scanning shortcuts, and
then allocate them to the start button.
If you place the document and press the Start button,
CaptureOnTouch starts and scanning starts.
 If the [Do not display the main screen when the scan is started
with the scanner button] checkbox is enabled in the Environ-
mental settings, the main CaptureOnTouch window will not be
displayed when a scan is started from the start button. Only dia-
log boxes and error messages during scanning, and completion
popup windows are displayed.
 If the [Do not display the main screen when the scan is started
with the scanner button] checkbox is enabled in the Environ-
mental settings, [Enable additional scan] and [Edit after scan-
ning] will be disabled when scanning is started from the start
button.
36