About This Manual - Simrad BSM-3 Installation Manual

About this manual

This document describes how to install the BSM-3 and connect the
unit to transducers and display units.
Separate installation instruction for transducers are included with
the transducer package.
The BSM-3 is compatible with the following MFD displays and
systems:
•
NSE
•
NSO, NSO evo2
•
NSS, NSS evo2
http://support.simrad-yachting.com
¼ Note:
Make sure the MFD has up-to-date software, - refer to the
website: www.simrad-yachting.com
Important text that requires special attention from the reader is
emphasized as follows:
¼ Note:
Used to draw the reader's attention to a comment or some
important information.
!
Warning:
Used when it is necessary to warn personnel that they should
proceed carefully to prevent risk of injury and/or damage to equipment/per-
sonnel.
| BSM-3 Installation Manual
| 5