Connecting The Bsm-3 To Your Display - Simrad BSM-3 Installation Manual

12 |

Connecting the BSM-3 to your display

The BSM-3 connects to your display system over an Ethernet
network, either directly or via a Network Expansion Port.
When connected to an NSO, the RJ45 to 5 pin cross-over Ethernet
cable included with the NSO system must be used.
¼ Note:
Above not relevant to NSO evo2
For details refer to the display system's Installation manual.
SINGLE
DISPLAY
SYSTEM
transducers
Ref
A
B
C
Installation and wiring |
MULTIPLE
DISPLAY
SYSTEM
A
BSM-3
B
+ _
12 - 24 V DC
Description
Ethernet cable
BSM-3 Power cable
Transducer cables
BSM-3 Installation Manual
NEP-2
C