Connecting The Cables - Roland DU2-64 User Manual

1-5 Connecting the Cables

Connecting the Cables
WARNING
Connect to an electrical outlet that complies with this machine's ratings (for
voltage,frequency, and current).
Incorrect voltage or insufficient current may cause fire or electrical shock.
WARNING
Connect to ground.
This can prevent fire or electrical shock due to current leakage in the event of
malfunction.
WARNING
Perform this task with all power switches left switched off.
Otherwise sudden movement of the machine may cause injury.
Connect the cables for the drying-heater unit and the blower-fan unit, and the power cord.
The printer and the drying-heater unit require separate high-amperage electrical outlets. Con-
nect the two power cords to outlets on separate systems. Also, make sure that the electrical
outlets meet the machine's ratings.
Blower-fan unit
Blower-fan
unit cable
Power cord
Power
connector
Drying-
heater unit
Drying-heater unit cable
Blower-fan
unit connector
Blower-fan
unit cable
Chapter 1 Introduction
Drying-heater
unit connector
Drying-heater
unit cable
Electrical outlet
23