Operation Of The Blower-Fan; Switching The Blower-Fan Unit On - Roland DU2-64 User Manual

2-2 Operation of the Blower-fan

Switching the Blower-fan Unit On

The blower-fan unit has no power switch. You switch the blower-fan unit on and off via settings made on the printer.
When you're using the blower-fan unit, set the printer's [BLOWER FAN] menu item to "ENABLE." When this menu item is
set to "ENABLE," the blower fan comes on at the same time when printing starts. When printing ends, the blower fan stops
automatically.
Procedure

Press

MENU
HEATER MENU
HEATER MENU

BLOWER FAN

BLOWER FAN
DISABLE

Press
Removing this unit
Before removing this unit, use the procedure described to set the [BLOWER-FAN] menu item to "DISABLE," and turn off the
power switch.
28
Chapter 2 Operation
.
Press
on the left.
Press
Press
on the left.
Press
Use
Press
ENABLE
in this order to go back to the original screen.
several times to display the screen shown
.
two times to display the screen shown
.
to select "ENABLE."
.