S Print Out; Main Function Change Macro; S Font; S Print Quality - Epson PP 408 User Manual

S PRINT OUT

This function initiates a printout of the parameter settings and macro
definitions. This printout is helpful for future reference and when macros need
to be changed.
To actually start the print operation it is necessary to leave the STOP mode
(by pressing the key - see also Chapter 3.1).
While this function is executed the display shows PRINT OUT.

Main Function CHANGE MACRO

S Font

A font is a family of characters with the same style and size. The appearance
of the font can be varied by using attributes such as:
The fonts included in the PM SER/PAR are:
S Data
S Letter Gothic
S Letter Gothic Italic
S Courier
S Micro
S Orator
S Orator-C
S Roman
S Prestige
S Script
S OCR A
S OCR B
S DATA BLOCK
see Appendix B for print samples.
PRINT TEST 3 lists all available fonts.
Note:
Configuring the printer
size
, bold, italic, etc.
3-7
Configuring the printer

S Print Quality

Three different print quality levels can be selected:
S Draft quality (font "Data")
S Near letter quality (NLQ displayed with the font name)
S Letter quality (LQ displayed with the font name).
Different print qualities result in different print speed.

S Sub/Super Font

When the SUB/SUPER FONT is set to "NO", sub and superscript text will be
raised or lowered a half line, but the text size itself will not change.
When set to "YES", the text size will be reduced, and printed above or below
the line.
2
Example: YES 5 or 5
2
2 or 5
NO 5
2

S Pitch

Indicates the number of characters printed per inch (10, 12, 15, 17, 18, 20 or
proportional).
Any pitch setting can be combined with any available font. In some cases this
may lead to a conflict with font designs. The pitch setting is, therefore, a
matter of personal taste.

S Line

Determines the number of lines per inch (line space).
3-8