S Top Margin; S Bottom Margin; S Perforation Skip; S Paper Source - Epson PP 408 User Manual

S The right margin is set to print position 80, 132 or 136, always measured
from the position of the first possible, not actual, left margin setting.
The left margin setting is influenced by the physical setting of the left tractor.
The above specifications are only correct if the tractors are in the original
positions, i.e. the left perforation is aligned with the center mark on the plastic
plate (distance between the marks is / ").
S The top margin indicates the first print line and is always set in steps of / ".
1
The position of the first margin is / " from the top of the paper and indicates
6
the baseline of the letter H in upright "Data" font (see illustration).
The top margin can be set to a maximum of / " down on the paper.
Left Margin
Top Margin
8
Bottom Margin
Configuring the printer
1
10
1
6
16
6
Right Margin
3-11
Configuring the printer
S The bottom margin indicates the last print line. Going beyond this margin
automatically initiates a form feed. The bottom margin is always set in steps
1
of / ".
6
The bottom margin can be set to a maximum of / ".
The above specifications are influenced by the settings in "Vertical Position"
(see section Vertical Positioning Adjustment in this chapter).

S Perforation Skip

If PERF. SKIP is set to YES the printer starts to print after specified top
margin and stops printing before the bottom Margin.
If PERF. SKIP is set to NO the printer ignores the top and bottom margin and
prints from the very first line to the very last one. That means that on a
standard 11" paper 66 lines are available for printing.

S Paper Source

The printer offers three input possibilities:
S TRACTOR LOWER (default)
S TRACTOR UPPER
S TRACTOR L/U (pool), that means that the printer switches automatically to
the other cassette once the cassette in use is out of paper. The empty
cassette can be loaded again and thus be ready for the next automatic
switch if needed. The pool function requires the use of the same type of
paper in both tractor cassettes.
S MANUAL/KEY (only for printer without cutter) - manual insertion of
single sheets; only with option for single sheets. The addition KEY means,
each input should be confirmed by a keystroke. Use the
S MANUAL (only for printer without cutter) - manual insertion of single
sheets; only with option for single sheets.
Please refer to chapter 6 Technical Data, for detailed media specifications.
3-12
8
6
key.