Table of Contents
Advertisement
Interface
S Parallel Centronics
®
S Serial RS-232-C/V.24
Buffer
S Up to 30 Kbyte in selectable sizes;
optional with RAM Extension up to 160 KB possible
Diagnostics
Selftest, `Hex dump', device status and remote diagnostics via interface.
Control Panel
16 character LCD for menu controlled setup, status- and error messages.
Dimensions
printer with cutter
Width
740 mm / 29.6"
Depth
455 mm / 18.2"
(incl. tractor cassette)
Height
327 mm / 13.1"
(without stacker)
Weight
printer without cutter
28.8 kg / 63 lbs
printer with cutter
33 kg / 72 lbs
Rated Voltage
100 - 120 / 200 - 240 V~ at rated f = 50 - 60 Hz
Power Consumption
200 W operating, 40 W stand by.
Environmental Temperature
Operating: + 10EC to + 35EC (+ 50EF to + 95EF)
Storage:
- 40EC to + 70EC (- 40EF to + 158EF)
Technical Data
printer without cutter
740 mm / 29.6"
370 mm / 14.8"
(incl. tractor cassette)
325 mm / 13"
6-5
Technical Data
Relative Humidity
20% - 80% (operating)
5% - 85% (storage)
Noise
Less than 55 dB(A) (operating) ISO 7779
(sound level measured from outside of the housing by an distance of 39.5 inch)
MTBF
10,000 h at 30% duty cycle
Agency Approvals
VDE (IEC 950), UL 1950, C-UL, CE, FCC-B
Printer Stand
Provides is the optimum work station convenience.
width
= 630 mm / 25"
depth
= 620 mm / 24.8"
710 mm / 28" (optional with V-Stacker Support)
height
= 860 mm / 34"
V-Stacker Support
Optional to lay down fanfold paper in the best way
width
= 460 mm / 18.4"
depth
= 320 mm / 12.8"
height
= 450 mm / 18"
Cut Sheet Tray only for printer without cutter
Optional to collect single sheets for output at the rear (BATCH)
width
= 440 mm / 17.6"
depth
= 240 mm / 9.6" for short formats (shortest position)
360 mm / 14.4" for long formats
height
= 200 mm / 8"
capacity = up to 600 single sheets
6-6
Advertisement
Table of Contents
