Installation
Choose a location
For optimum performance of your
cordless telephone system:
. Choose a central location for your
base unit .
2 . Install your base unit and any
accessory handsets as far away
from other electronic equipment
such as personal computers,
television sets and microwave
ovens .
3 . In locations where there are
multiple cordless telephones,
separate base units as far as
possible from each other .
4 . Install your telephone equipment
away from heat sources and
direct sunlight .
5 . Avoid excessive moisture, dust or
extreme cold .
.
2 .
Install handset battery
. Align the two holes in the plug with
the socket pins, then snap the plug
into place .
2 . Place the battery in the compartment with
the wires in the upper left corner .
3 . Replace cover by sliding it upwards until
it clicks into place .
4 . Be sure to charge the battery in the
handset for a minimum of 6 hours before
using your phone .
www.vtechphones.com
• Use only the
• Place the
�����
3
provided VTech
battery, or
equivalent .
handset in its
base when
not in use to
ensure optimum
performance .
5