To Recall/Change A Preset Station; Alarm Operation; Snooze/Sleep/Dimmer Button - Timex T231 User Manual

To Recall A Preset Station
Tune to the desired band and then press the PRESETS button to scroll through the 10 preset
memories to find your desired station.
To Change A Preset Station
1. Tune to the new station that you want to store.
2. Press and hold the PRESETS button until the Preset Number indicator begins flashing.
3. Press the HOUR /
flashing in the display.
4. Press the PRESETS button once more. The new station is entered into the preset memory
number that you selected and the previous station is deleted.

Alarm Operation

1. When using this product for the first time, press and hold the ALM 1 or ALM 2 button to
reconfirm the wake-up time setting. Follow the "Setting The Alarm Times" procedure above
to adjust the wake-up times if necessary.
2. Continue pressing the ALM 1 or ALM 2 buttons to select either Buzzer or Radio as the
wake-up source. The appropriate indicator will remain in the display to confirm your
selection. NOTE: If you selected Radio as the wake up source make sure that the volume
level is loud enough to wake you up in the morning. The alarm will turn on to the last station
you were listening to before turning the unit off.
3. At the selected wake up time the buzzer or the radio will turn on. The alarm will continue for
one hour and then shut off and reset itself for the following day.
4. To stop the alarm sooner, press the MODE/ALM RESET button. The alarm stops
immediately and resets itself for the following day.
5. To reset one or both alarms so that they do not turn on the following day, continue pressing
the ALM 1 or ALM 2 buttons until the Buzzer or Radio indicators no longer appear in the
display.
Snooze / Sleep / Dimmer Button
When the alarm is sounding press the SNOOZE/SLEEP/DIMMER button to stop the alarm
temporarily for a few minutes extra sleep. The alarm will turn on again after 9 minutes. You may
repeat the Snooze operation several times within one hour, but after one hour the alarm will not
turn on again and will reset itself for the following day.
When the alarm is not sounding press the SNOOZE/SLEEP/DIMMER button to activate the
Sleep to radio timer. The radio will turn on to the last tuned station and the display will show
"90" indicating that the radio will play for 90 minutes before auto shutoff. To adjust the amount
of sleep time, continue pressing the SNOOZE/SLEEP/DIMMER button to reduce the amount of
time by 10 minutes with each press. When the Sleep timer counts down to "00" the radio shuts
off automatically. To shut the radio off at any time press and hold the MODE/ALM RESET
button.
You may adjust the radio volume level during sleep timer operation.
or MIN / button until the preset number that you want to change is
9