Listening To The Radio; Operating The Radio; Programming Radio Station Settings; Antenna Information And Adjustment - Timex T618 Operation Manual

Stereo cd clock radio with digital tuning and nature sounds

Hide thumbs Also See for T618:

User manual

Table Of Contents

Table of Contents

Operating the Radio

1. Press the

Radio Button once to turn on the radio. The display will show "On" before returning to the

clock display. The bottom of the display will show the digital radio frequency.

Note: If the

Radio Button is pressed more than once, the unit will enter the sleep mode, with the radio

operating on a timer. See Sleeping to Radio with Timer for more information about this feature.

2. Press the

Band Button to select a radio band. There are two different FM bands (to be used when

programming preset radio station settings) and one AM band.

3. Press the

Reverse/Tuning or

radio stations, hold a button for about three seconds. The radio will rapidly advance to the next strong signal.

4. You may also use the

Radio Station Memories section for instructions on programming radio station settings.

5. Adjust the volume using the

6. Press the

Off/Reset Button to turn the radio off. The bottom of the display will show the calendar setting.

Programming Radio Station Settings

The radio features 18 programmable radio station settings so you can access your favorite stations quickly.

1. Tune to the first station you wish to program into your preset station settings.

2. Press and hold one of the six

slot. When the unit beeps, the station setting has been saved.

3. Continue programming a total of 18 stations into memory: six each into the two FM bands and six into the

AM band. To edit a setting, simply program a new frequency into the memory slot.

Antenna Information and Adjustment

FM – Extend the FM wire antenna to its full length and vary the direction to its strongest signal.

AM – The AM bar antenna is located inside the cabinet. Rotate the unit until you find the strongest AM signal.

Last Station Memory

The tuner always remembers the last station selected before the radio was switched off, and automatically selects

the station again when the radio is turned on.