Installing The Maintenance Console; Quick Setup - Panasonic KX-TDE100 Pc Programming Manual

1.2.1 Installing and Starting the Maintenance Console

Installing the Maintenance Console

Note
•
Make sure to install and use the latest version of the Maintenance Console.
•
To install or uninstall the software on a PC running Windows XP Professional, you must be logged in
as a user in either the "Administrators" or "Power Users" group.
•
To install or uninstall the software on a PC running Windows Vista Business, you must be logged in
as a user in the "Administrators" group.
1.
Copy the setup file of the Maintenance Console to your PC.
2.
Double-click the setup file to run the installer.
3.
Follow the on-screen instructions provided by the installation wizard.
Starting the Maintenance Console and Assigning the Basic Items (Quick
Setup)
When you start the Maintenance Console with the Installer Level Programmer Code and connect to the PBX
for the first time after initialisation (with the factory default setting), Quick Setup will launch automatically. During
Quick Setup, you will set up the following basic items:
•
Date and Time of the PBX. The date and time set to the PC's clock will be used.
•
System Password for installer for PC programming.
•
Operator and manager settings. Operator extensions for all time modes (day/lunch/break/night) can be
assigned.
•
Flexible Numbering plan to Type 1 or Type 2. If Type 1 (with
numbers (except access numbers) when an extension user wants to use a feature.
•
Operator call and Idle Line Access/ARS numbers.
•
Remote Maintenance Dial Number. Enter the complete telephone number of the PBX (including the country
code). When necessary, this number will be used to access the PBX from a remote location for
maintenance purposes.
•
LAN settings. The DHCP Client function, IP addresses of the IPCMPR (for KX-TDE100/KX-TDE200)/
IPCEMPR (for KX-TDE600) and DSP cards, subnet mask address, and default gateway address can be
assigned.
•
Virtual card installation. Select whether to install a V-IPEXT, V-SIPEXT, or V-SIPGW card.
1. Connect the PC to the PBX with an Ethernet straight cable or RS-232C cross cable.
2. Start the Maintenance Console from the Start menu.
3. "Information before programming" appears.
a.
Carefully read this important additional information, which includes updates to this and other
manuals.
b.
Click OK to close this window.
4. a.
Enter the Installer Level Programmer Code (default: INSTALLER).
The Programmer Code authorises different programming levels, and the Quick Setup is only
available when you start the Maintenance Console with the Installer Level Programmer Code.
Note
There are 2 other Programmer Codes with limited authorisation: Administrator Level (default:
ADMIN), and User Level (default: USER). (® 1.2.2 Password Security)
b.
Click OK.
5. Click Connect.
18 PC Programming Manual
) is selected, " " must prefix all feature