Ars Mode - Panasonic KX-TDE100 Pc Programming Manual

8.6 [6-6] Tenant

ARS Mode

Specifies the ARS mode used when making a trunk call.
Value Range
Off: ARS is disabled.
On for Local Access Operation: ARS operates when an extension user makes a call using any Idle Line Access
method.
On for Any CO Access Operation: ARS operates when an extension user makes a call using any Trunk Access
method.
Same as System Setting: The setting specified in
Maintenance Console Location
8.6 [6-6] Tenant
Programming Manual References
10.1 [8-1] System Setting
Feature Guide References
1.10.1 Automatic Route Selection (ARS)
2.2.3 Tenant Service
System Speed Dial
Specifies which system speed dialling table is used by the tenant.
Value Range
Same as System Setting: PBX common system speed dialling numbers are used.
Tenant Exclusive: Individual tenant system speed dialling numbers are used.
Maintenance Console Location
8.6 [6-6] Tenant
Programming Manual References
8.1 [6-1] System Speed Dial
Feature Guide References
1.6.1.5 Speed Dialling—Personal/System
2.2.3 Tenant Service
838 PC Programming Manual
ARS Mode in 10.1 [8-1] System Setting is applied.