Panasonic KX-TDE100 Pc Programming Manual page 198

3.18 [1-1] Slot—Port Property - Virtual SIP Extension Port
When changing the extension number, make sure that the extension port is not in use. If the extension number
is changed while the port is in use, the new extension number will not come into effect.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
3.18 [1-1] Slot—Port Property - Virtual SIP Extension Port
Programming Manual References
None
Feature Guide References
1.31.2 SIP (Session Initiation Protocol) Extension
Password
Specifies the password used for registering a SIP Extension to the PBX. While it is possible to enter a password
manually for each SIP Extension, you can copy Extension Number to Password clicking Copy to button. This
parameter can only be modified when the virtual SIP extension port is set to OUS.
Value Range
3–16 characters (consisting of 0–9, a–z, A–Z)
Maintenance Console Location
3.18 [1-1] Slot—Port Property - Virtual SIP Extension Port
Programming Manual References
None
Feature Guide References
1.31.2 SIP (Session Initiation Protocol) Extension
Connection
Indicates the port status (reference only).
This column offers two ways to open the screen to select the port command:
•
Click the desired cell in the column.
•
Select the desired cell in the column, and then click Command.
This cell is only active when Status on this screen shows Registered.
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
198 PC Programming Manual