1-4] Clock Priority - Panasonic KX-TDE100 Pc Programming Manual

3.60 [1-4] Clock Priority

3.60 [1-4] Clock Priority
Slot Number (KX-TDE100/KX-TDE200), Shelf-Slot Number (KX-TDE600)
Selects and prioritises slot numbers for the BRI, PRI, T1, and E1 cards that are used to forward a clock pulse
from an external source to the PBX.
Obtain the master clock time from the outside line that the telephone company provides.
To change Clock Priority, follow the steps below:
1.
Assign a Clock Priority to each BRI, PRI, T1 and/or E1 card.
2.
Set the status of the present clock source card to "OUS", then "INS".
Note
If multiple PBXs are used to establish a private network (TIE line service, QSIG network, etc.) without being
connected through the telephone company, assign only one PBX as the clock source on the network. That
PBX should have a card connected to a telephone company line selected as its clock source. All other
PBXs should have cards connected to the network selected as the clock source. This enables all PBXs on
the network to synchronise their timing.
Value Range
None, BRI4, BRI8, PRI23, PRI30, T1, E1
Maintenance Console Location
3.60 [1-4] Clock Priority
Feature Guide References
None
434 PC Programming Manual