Feature Guide References
None
Sending Caller ID to TIE
Specifies whether Caller ID information is sent when
E&M-C.
Value Range
No, Yes
Maintenance Console Location
3.41 [1-1] Slot—Port Property - E1 Port
Programming Manual References
None
Feature Guide References
None
Receiving Caller ID from TIE
Specifies whether Caller ID information is received when
E&M-C.
Value Range
No, Yes
Maintenance Console Location
3.41 [1-1] Slot—Port Property - E1 Port
Programming Manual References
None
Feature Guide References
None
Ringback Tone to Outside Caller
Enables the PBX to send a ringback tone to an outside caller when the network cannot send the tone.
Value Range
Disable, Enable
3.41 [1-1] Slot—Port Property - E1 Port
Channel Type on this screen is set to E&M-P or
Channel Type on this screen is set to E&M-P or
PC Programming Manual
365