Ⅲ. ADJUSTMENT
4) B/T LEVEL ADJ
After changing the MAIN PCB, adjust WARNING LEVEL and LOCK LEVEL.
<How to adjust>
a...Prepare the POWER..SUPPLY.
b...Connect the camera to the POWER..SUPPLY.
c...Set the voltage to 2.71V.
d...Downloading the program file and save it to SD memory card.
e...Insert the SD memory card and turn on the camera.
f...The adjustment will be done automatically. There are no displays on the LCD.
g...After completing the upgrade, the camera is turned off automatically.
<Description of TXT file>
When modify the program, use the Memo Pad of Windows and save it as "STS3105ADJ.txt"
Use only section related to each adjustment.
//////////////////////////////////////////////////////////
// PROJECT : STS3-105
// PROCESS : PM Batch Test 8
// DATE : 2007.02.15
/////////////////////////////////////////////////////////
//======================================#0. adj control
setting
adj_control check_process_id 65535
adj_control set_process_id 65534
adj_control save_e2prom 1
adj_control save_data_file 1
68