Samsung S1050 Service Manual page 48

Ⅲ. ADJUSTMENT
2. ADJUSTMENT CAUTION
1) Basic Information of Adjustment
After changing the electronic parts of S1050, the parts have to be adjusted in accordance withe the adjusted items.
The items listed on the table are have to be adjusted after changing.
1> To adjust the camera after changing the electronic parts, see the below table.
FIRMWARE UPGRADE
PUNT ADJ.
SHUTTER CLOSE TIME ADJ.
BACK LASH ADJ.
FLASH ADJ.
BATTERY LEVEL ADJ.
OB SETTING
BURNING TEST & CCD DEFECT CELL
EEPROM READ
EEPROM WRITE
2> Equipment
▶ Equipments
- AE TESTER : AE TESET can test up to LV 16.7.
- POWER SUPPLY : 3.3V / 2A
▶ Chart
- Focus Chart
- Gray Chart(18%..Reflection Paper)
MAIN POWER
PCB PCB
●
●
●
●
● ●
● ●
●
● ●
48
BARREL CCD
ASS' Y ASS' Y
●
● ●
● ●
● ●
●
● ●