3> Adjustment program file
To adjust all items, all kinds of code by items have to be inserted in program file and saved them to the SD card
as TXT file type. The codes are listed below
< Description of TXT file >
Use the Memo pad of Basic Windows program and save it as "STS3105ADJ.txt".
//////////////////////////////////////////////////////////
// PROJECT : STS3-105
// PROCESS : PM Batch Test 8-process
// DATE : 2007.02.15
/////////////////////////////////////////////////////////
//======================================#0. adj control
setting
adj_control check_process_id 65535
adj_control set_process_id 65534
adj_control save_e2prom 1
adj_control save_data_file 1
adj_control save_process_pass 1
adj_control batch 1
adj_control osd_delay 0
adj_control signal 100
//======================================#1. OB
delay 5
mode program
adj_ob preview_agc 96
adj_ob preview_target_rgb 0 0 0
adj_ob preview_luma_min_max 1500 4000
adj_ob capture_agc 96
adj_ob capture_target_rgb 0 0 0
adj_ob capture_luma_min_max 1500 4000
adj_ob run
49
Ⅲ. ADJUSTMENT