Selecting The Cinema Mode (480I And 1080I Signals); Using The Freeze Feature; Adjusting The Picture; Selecting The Picture Mode - Toshiba Regza 42RV535U Owner's Manual

52RV535U_EN.book Page 43 Tuesday, July 22, 2008 5:25 PM
Selecting the cinema mode
(480i and 1080i signals)
When you view a DVD (3:2 pulldown processed) from a
DVD player connected to the Video 1, Video 2,
ColorStream HD1, ColorStream HD2 (component
video), or HDMI inputs on the TV, smoother motion can
be obtained by setting the Cinema Mode to Film.
To set the Cinema Mode to Film:
1
From the Video menu, highlight Theater Settings
and press T.
2
In the Cinema Mode field, select Film.
3
To save the new settings, highlight Done and press
T.
To revert to the factory defaults, highlight Reset and
press T.
To set the Cinema Mode to Video:
Select Video in step 2 above.

Using the FREEZE feature

To use the FREEZE feature:
1
When viewing the TV, press B to make the picture
a still picture.
2
To return to the moving picture, press B again (or
any other button).
Note: If the TV is left in FREEZE mode for more than 15
minutes, the FREEZE mode will automatically be released
and the TV will return to moving picture.
Using the FREEZE function for any purpose other than your
private viewing may be prohibited under the Copyright Laws
of the United States and other countries, and may subject
you to civil and criminal liability.

Adjusting the picture

Selecting the picture mode

You can select your desired picture settings from the
following modes, as described below.
Chapter 6: Using the TV's features
Mode
AutoView
Sports
Standard
Movie
PC
PC Fine
Preference
Note:
• PC mode is available for HDMI and PC inputs only (grayed
out for other input sources).
• PC Fine mode is only available when on an HDMI input with
Enable REGZA LINK set to On and a Toshiba REGZA LINK
PC connected (- page 54).
• Because the AutoView mode automatically adjusts picture
settings based on ambient light conditions and input signal
content, most items in the Picture Settings and Advanced
Picture Settings menus are grayed out when it is selected.
1
From the Video menu, highlight Mode and press T.
2
Press B or b to select the picture mode you prefer
and press T.
Note: The picture mode you select affects the current
input only. You can select a different picture mode for
each input.

Adjusting the picture quality

You can adjust the picture quality (Contrast, Backlight,
DynaLight™, Brightness, Color, Tint, and Sharpness) to
your personal preferences.
Selection
Contrast
Backlight*
DynaLight**
Brightness
Color
Tint
Sharpness
* Backlight
This feature adjusts the brightness of the entire screen. When in
video mode and no signal is input, this will automatically be set to 0.
(Settings are stored in memory.)
** DynaLight
This function automatically strengthens the black coloring of dark
areas in the video according to the level of darkness.
Picture Quality
Automatically adjusts picture settings
based on ambient light conditions and
input signal content
Bright and dynamic picture
Standard picture settings
Lower contrast for darkened room
Designed for viewing of PC tables and
documents
Designed for viewing of media from a
Toshiba REGZA LINK PC.
Your personal preferences
Pressing C Pressing c
lower higher
darker lighter
On/Off On/Off
darker lighter
paler deeper
reddish greenish
softer sharper
RV535U (E/F) Web 213:276
(continued)
43