Kodak Printe Reference Manual page 41

Prime menu
Prime All
Prime Single
Start Routine
Clean (Color)
Clean All
Color Calibration Menu
(Color) Vertical
(Color) Horizontal
Calib Print Test
Calibration Menu (Bold indicates the default)
Use Calib XY
Paper Axis Test
Color Db Menu
Open Jet Menu
Paper Axis
Prints the prime pattern for each cartridge.
Provides access to a further menu in which you can choose to prime
an individual cartridge.
Prints a recovery pattern/jet status plot.
Causes the selected cartridge to clear its jets by expelling a small
amount of ink into the service station.
Clears the jets for all the cartridges. Select this function whenever the
printer has been idle for four hours or more.
lets you enter the number which corresponds to the best vertical
alignment in the test pattern for the C, M, and Y cartridges.
lets you enter the number which corresponds to the best horizontal
alignment in the test pattern for C, M, and Y cartridges.
prints the current heads, current horizontal head to head, and other
calibration patterns described in the Quick Start Guide.
provides access to a further menu in which you can set this function
On (default) or Off.
prints the paper axis test pattern.
provides access to a further set of menus in which you can print the
color deadband test pattern and set deadband velocity compensation
for each cartridge.
provides access to a further set of menus in which you can print the jet
status pattern and set the compensation for jets in each cartridge.
provides access to a further menu in which to enter values determined
by examining the paper axis test pattern.
TM
VInylJet 36 Reference Manual
Menu Tree B-9