Kodak EasyShare printer dock User Manual page 46

Troubleshooting
Print light
Light status
Light glows steady
green
Light blinks green
Light is off
40
Cause
The printer dock is ready for
printing.
The printer dock is printing.
There are no pictures in the
camera or on the card.
Camera is not docked or
Kodak 8-in-1 card reader is
not connected.
Camera is not properly seated
on connector.
Camera is transferring
pictures to the computer, or
has established an active
connection to the computer.
A PictBridge compatible
device is connected.
Action/solution
None required.
None required.
To enable Print:
1
Take pictures.
2
Dock camera, or connect
Kodak 8-in-1 card reader. If
using card reader, make
sure card is inserted.
Reseat the camera on the
printer dock (page
None required.
When transfer is complete,
press the blinking Transfer
button, .
None required.
Print button is disabled; print
command is controlled from
PictBridge device.
www.kodak.com/go/support
10).