Kodak EasyShare printer dock User Manual page 39

If...
Print is too light
Print is too dark or
is discolored
Pictures are
cropped
A selected picture
does not print.
Nothing happens
when you try to
print
www.kodak.com/go/support
Try the following
IMPORTANT: Use only Kodak color cartridge & paper kits
with your printer dock. Do not use inkjet
paper.
■
Make sure the paper is loaded with the glossy side up and
the Kodak logo facing down. Reload if necessary
■
Try re-taking the picture with the flash off.
■
Adjust the exposure compensation on your camera, and try
re-taking the picture.
See your camera user's guide for details.
■
Edit the picture using Kodak EasyShare software on your
computer.
■
Try re-taking the picture with the flash on, or move within the
flash range of the camera.
■
Adjust the exposure compensation on your camera, and try
re-taking the picture.
See your camera user's guide for details.
■
Edit the picture using Kodak EasyShare software on your
computer.
■
Make sure the printer dock is not placed in direct sunlight or
is not operating in a high-temperature environment.
■
Make sure the cooling vents are not blocked or dirty
■
Set your camera to Best (3:2) picture quality. See your camera
user's guide for details.
■
Adjust cropped pictures using Kodak EasyShare software on
your computer.
■
If you are printing from an application on your computer,
select the proper paper size in print options.
■
Image file may be corrupt. Review the picture on the camera
or computer and delete if necessary.
■
Check the power connections
■
Remove the paper tray, check that paper is properly loaded,
and re-install (page
■
If the paper light glows steady amber, load paper
■
Make sure the color cartridge is properly installed
color cartridge light is on, install a new cartridge.
(page 3).
7).
Troubleshooting
(page 6).
(page 2).
(page 6).
(page 4). If
33