Decode Session Timeout; Fuzzy 1D Decoding - Symbol DS 3478 Product Reference Manual

4-8 DS 3478 Product Reference Guide

Decode Session Timeout

This parameter sets the maximum time decode processing continues during a scan attempt. It is programmable in 0.1 second
increments from 0.5 to 9.9 seconds. The default timeout is 3.0 seconds.
To set a Decode Session Timeout, scan the bar code below. Next, scan two numeric bar codes from Appendix D, Numeric Bar Codes
that correspond to the desired on time. Single digit numbers must have a leading zero. For example, to set a Decode Session Timeout
of 0.5 seconds, scan the bar code below, then scan the 0 and 5 bar codes. To correct an error or change the selection, scan Cancel
on page D-5.

Decode Session Timeout

Fuzzy 1D Decoding

Enable this parameter to increase aggressiveness when decoding significantly damaged 1D symbols. Disabling this parameter
reduces decode aggressiveness on such symbols, but increases decode aggressiveness on 2D symbols.
123Scan does not support this option.
*Enable Fuzzy 1D Decoding
Disable Fuzzy 1D Decoding