Input Source Selection (Component, Rgb Scart 21-Pin) - Sanyo PJLink PLC-XE33 Owner's Manual

Input Source Selection (Component, RGB Scart 21-pin)

Direct Operation
Choose Computer 1(Component) or Computer 1(Scart) by pressing the COMPONENT or the COMPUTER 1
button on the remote control.
Before using these buttons, correct input source should be selected through Menu operation as described
below.
Remote Control
Menu Operation
Press the MENU button to display the On-Screen
1
Menu. Use the Point
then press the Point
Use the Point
2
then press the Point
Use the Point
3
RGB(Scart) and then press the SELECT button.
Component
RGB (Scart)
Note:
When the Input Search function is set to On1 or On2,
the input signal will be searched automatically (p.44).
Downloaded From projector-manual.com Sanyo Manuals
COMPUTER 1 button
Computer 1(RGB)
Computer 1(Scart)
COMPONENT button
Computer 1(Component)
buttons to select Input and
▲▼
or the SELECT button.
►
buttons to select Computer 1 and
▲▼
button.
►
buttons to select Component or
▲▼
When the input source is coming from video
equipment connected to the COMPUTER
IN 1/S-VIDEO IN/COMPONENT IN terminal
with a Component-VGA Cable, select
Component.
When the input source is coming from video
equipment connected to the COMPUTER
IN 1/S-VIDEO IN/COMPONENT IN terminal
with a Scart-VGA Cable, select RGB
(Scart).
Input Menu
Video Input
37