Installation; Positioning The Projector; Adjustable Foot - Sanyo PJLink PLC-XE33 Owner's Manual

Multimedia projector
Hide thumbs Also See for PJLink PLC-XE33:
Table of Contents

Advertisement

Installation

Positioning the Projector

For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the
screen.
Note:
• The brightness in the room has a great influence on picture quality. It is recommended to limit ambient
lighting in order to obtain the best image.
• All measurements are approximate and may vary from the actual sizes.
A : B = 6 : 1
Screen Size
(W x H) mm
4 : 3 aspect ratio
Zoom (max)
Zoom (min)

Adjustable Foot

Projection angle can be adjusted up to 10.0 degrees with
the adjustable foot.
Lift the front of the projector and push the foot lock
latch on the projector.
Release the foot lock latch to lock the adjustable foot
and rotate the adjustable foot to adjust the position and
tilt.
To retract the adjustable foot, lift the front of the
projector and push and undo the foot lock latch.
Keystone distortion of the projected image can be
corrected by menu operation.(see pages 23, 44-45)
Downloaded From projector-manual.com Sanyo Manuals
21.5'(6.55m)
16.1'(4.90m)
10.7'(3.26m)
4.3'(1.30m)
100"
40"
83
40"
813 x 610
2032 x 1524
4.3'(1.30m)
10.7'(3.26m)
5.1'(1.55m)
12.9'(3.92m)
38.7'(11.80m)
32.3'(9.84m)
200"
150"
167
125
100"
150"
3048 x 2286
16.1'(4.90m)
19.4'(5.90m)
Foot Lock Latch
(Inch Diagonal)
300"(tele )
300"(wide)
Max. Zoom
Min. Zoom
250
A
B
200"
300"
4064 x 3048
6096 x 4572
21.5'(6.55m)
32.3'(9.84m)
25.8(7.87m)
38.7'(11.80m)
Adjustable Foot
(Center)
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Plc-xe33

Table of Contents