Input Source Selection (Component, Rgb Scart 21-Pin) - Sanyo PLC-XC56 Owner's Manual

Video Input

Input Source Selection (Component, RGB Scart 21-pin)

Direct Operation
Choose Computer 1(Component) or Computer 1(Scart) by pressing the INPUT button on the top control or
press the COMPONENT button or the COMPUTER 1 on the remote control.
Before using INPUT button, correct input source should be selected through Menu operation as described
below.
Remote Control
Menu Operation
Press the MENU button to display the On-Screen
1
Menu. Use the Point
then press the Point
2
Use the Point
then press the Point
3
Use the Point
RGB(Scart) and then press the SELECT button.
When the input source is coming from video
Component
equipment connected to the COMPUTER
IN 1/COMPONENT IN terminal with a
Component-VGA Cable, select Component.
When the input source is coming from video
RGB (Scart)
equipment connected to the COMPUTER
IN 1/COMPONENT IN terminal with a Scart-
VGA Cable, select RGB (Scart).
Note:
When the Input Search function is set to On1 or On2,
the input signal will be searched automatically (p.45).
38
COMPUTER 1 button
Computer 1(RGB)
Computer 1(Scart)
COMPONENT button
Component
buttons to select Input and
or the SELECT button.
buttons to select Computer 1 and
button.
buttons to select Component or
Top Control
Computer 1 ( RGB)
/(Component) / (Scart)
Computer 2 (PC digital) /
INPUT button
Input Menu
(AV HDCP) /
(Analog)
Video
S-video
RGB(PC digital)
RGB(PC digital)