Input Source Selection ( Component, Rgb Scart 21-Pin ) - Sanyo PLC-SW30 Owner's Manual

Input Source Selection ( Component, RGB Scart 21-pin )

Direct Operation
Choose Computer by pressing INPUT button on the top control or
COMPUTER button on the remote control.
Before using these buttons, correct input source should be selected
through menu operation as described below.
Menu Operation
1 Press MENU button to display the On-Screen Menu. Press
Point 7 8 button to move the red frame pointer to INPUT Menu
icon.
2
Press Point
Computer and then press SELECT button. The Source Select
Menu will appear.
3 Move the pointer to the source that you want to select and then
press SELECT button.
Component
RGB (Scart)
Note :
Component-VGA Cable and Scart-VGA Cable are optionally supplied. See page
51 for order.
Downloaded From projector-manual.com Sanyo Manuals
d button to move the red arrow pointer to
When the input source is coming from video
equipment connected to the COMPUTER IN
/COMPONENT IN terminal with a Component-VGA
Cable, select Component.
When the input source is coming from video
equipment connected to the COMPUTER IN
/COMPONENT IN terminal with a Scart-VGA Cable,
select RGB (Scart).
INPUT button
Video
Computer
Input Menu icon
INPUT MENU
Move the pointer (red
arrow) to Computer and
press SELECT button.
Source Select Menu
Move the pointer to
Component or RGB ( Scart )
and press the SELECT button.
Video input
31