Auto Pc Adjustment - Sanyo PJLink PLC-XE33 Owner's Manual

Auto PC Adjustment

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical
positions to conform to your computer.
Menu Operation
Auto PC adj .
Press the MENU button to display the On-Screen
1
Menu. Use the Point
and then press the Point
Use the Point
2
then press the SELECT button.
To store adjustment parameters
The adjusted parameters from the Auto PC Adjustment can
be stored in the projector. Once the parameters are stored,
the setting can be done just by selecting a Mode (1–5) in
the PC System Menu (see page 28). See also "Store" on
page 31.
Note:
• Fine sync, Total dots, Horizontal and Vertical
position of some computers cannot be fully adjusted
with the Auto PC Adjustment function. When the image
is not provided properly with this operation, manual
adjustments are required (pp.30-31).
• The Auto PC Adjustment cannot be operated when 480i,
575i, 480p, 575p, 720p,1035i or 1080i is selected in the
PC System Menu (p.28).
Downloaded From projector-manual.com Sanyo Manuals
buttons to select PC adjust
▲▼
or the SELECT button.
►
buttons to select Auto PC adj . and
▲▼
PC adjust Menu
Use Point
▲▼
adj . and press the SELECT button.
Please wait . . . appears while the Auto PC
adjustment is in process.
Computer Input
buttons
to select Auto PC
29