2-Channel Mode Settings - Denon ADV-1000 Operating Instructions Manual

[1] 2-channel mode settings

In the auto decode mode, it is possible to automatically conduct multi-channel playback in the Dolby Digital or DTS surround mode or play in
the stereo 2-channel mode (AUTO STEREO mode: factory default setting). For 2-channel input signals, one of four play modes can be set
with the 2-channel mode setting (Auto Stereo, Dolby Pro-Logic II Cinema, Dolby Pro-Logic II Music and Dolby Pro-Logic).
When the function is set to VCR, CDR/TAPE or TUNER, the "Auto Stereo" 2-channel mode cannot be selected. To play in stereo,
set the surround mode to "STEREO" (page 35).
3
1 Set the surround mode to "AUTO DECODE".
• "AUTO DECODE" is displayed, then the normal display
reappears.
SURROUND
MODE
Main unit
If the mode is set to anything other than AUTO DECODE,
the AUTO DECODE mode can be set using the AUTO
DECODE/2CH MODE button on the main unit.
2 Press the SURR.PARA button on the remote control unit and
select the 2-channel decode mode.
This can be selected when the digital input consists of no
signal, PCM signals, Dolby Digital 2-channel signals, as
well as when the analog input is selected.
Downloaded From Disc-Player.com Denon Manuals
1
POWER
1, 3 1
VCR POWER
TV POWER TV POWER CH TV/VCR SLEEP
+10 0
CALL
DISPLAY RETURN INPUT MODE SURROUND
1
MENU FUNCTION
3
ENTER
MODE
VOLUME
BAND
MUTE
CH SHIFT
NTSC/PAL STATUS
TU MEMO
SUB TITLE AUDIO ANGLE TOP MENU
PROG/DIRECT REPEAT A-B REPEAT RANDOM
CH.SELECT T.TONE SDB/TONE SURR.PARA
2
SETUP CDR/MD/TAPE TUNER/TV/VCR DVD
REMOCON MODE
FUNCTION
SURROUND
/ SELECT
Main unit Remote control unit
SURR.PARA
Remote control unit
3 Select the desired 2-channel
decode mode using the (
) cursor buttons on
the remote control unit.
• The mode switches as follows
each time one of the buttons is
pressed:
AUTO ST
PRO LOGIC
If the AUTO DECODE/2CH MODE button on the main unit
is pressed when the mode is already set to AUTO
DECODE, the mode switches to the 2-channel mode. The
mode switches as follows each time the button is
pressed.
AUTO STEREO
PRO LOGIC
The Auto Stereo mode can be selected when the function
is set to DVD, TV/DBS or V.AUX.
Once the surround parameters have been set, stop operating
buttons. After several seconds the display returns to normal and
the settings are automatically validated.
NOTES:
• The 2-channel decode mode cannot be set when Dolby Digital
5.1-channel signals or DTS signals are being input.
• The 2-channel mode setting is stored in the memory individually
for the DVD, TV/DBS and V.AUX modes.
ENGLISH
and
Remote control unit
PL II CINEMA
PL II MUSIC
PLO LOGIC II C
PLO LOGIC II M
41