Presetting Fm And Am Stations; Listening To Preset Stations - Denon ADV-1000 Operating Instructions Manual

(3)

Presetting FM and AM stations

Example: Presetting FM station (currently tuned in) at preset number P03
2
Before operating the remote control unit!
Be sure to press the proper remote control mode selector
button to set the remote control unit to the AV mode.
1
Tune in the broadcast station that is to be preset and press
the Memory button.
• A "P0 -" ("P1-", "P2-" or "P3-") indication flashes for 10
seconds.
Presetting
• Up to 40 AM or FM stations can be preset using this procedure.
• In addition to the reception frequency, the reception mode (monaural or auto) is also preset, so check the display when presetting stations.
• If a station is preset at a number where a station is already preset, the previous station is replaced with the new station.
• The preset memory is not cleared when the power cord is unplugged.

Listening to preset stations

(4)
Example: Listening to the station preset at number P03 (This operation is only possible from the remote control unit.)
1
Downloaded From Disc-Player.com Denon Manuals
POWER
VCR POWER
TV POWER
ENTER
MODE
VOLUME
BAND
2
MUTE
CH SHIFT
NTSC/PAL STATUS
1,3
TU MEMO
SUB TITLE AUDIO ANGLE TOP MENU
PROG/DIRECT REPEAT A-B REPEAT RANDOM
CH.SELECT T.TONE SDB/TONE SURR.PARA
SETUP CDR/MD/TAPE TUNER/TV/VCR DVD
NTSC/PAL
MEMO
Remote control unit
POWER
VCR POWER
TV POWER
ENTER
MODE
VOLUME
BAND
1
MUTE
CH SHIFT
NTSC/PAL STATUS
TU MEMO
SUB TITLE AUDIO ANGLE TOP MENU
PROG/DIRECT REPEAT A-B REPEAT RANDOM
CH.SELECT T.TONE SDB/TONE SURR.PARA
SETUP CDR/MD/TAPE TUNER/TV/VCR DVD
REMOCON MODE
2
While the "P0 -" ("P1-", "P2-" or "P3-") indication is flashing,
use the shift button and the channel (CH) buttons (–, +) to
display the preset number "P03".
Each press of the shift button adds 10 to the current preset
number in the range of P01 to P40.
Example:
Starting with a P13
setting, each press of
the shift button results
in the changes P13 /
P23 / P33 / P03 /
P13 /...
TUNER/TV/VCR
Example:
Starting with a P00 setting, each press of the shift button results in
the changes P0- / P10 / P20 / P30 / P40 / P10 /...
3
Press the MEMORY button while the "P03" display is
flashing.
• The "P03" display will light and presetting will be
completed.
Before operating the remote control unit!
Be sure to press the proper remote control mode selector
button to set the remote control unit to the AV mode.
1
Press the remote control shift button and the channel (CH)
button (–, +) and select preset number "P03".
SHIFT
CH
Remote control unit
NTSC/PAL
MEMO
Remote control unit
SHIFT
CH
Remote control unit
ENGLISH
TUNER/TV/VCR
53