Setting Parameters In The Plii Cinema, Plii Music / Pro Logic Modes; Center Width - Denon ADV-1000 Operating Instructions Manual

[2] Setting the parameters in the PLII CINEMA, PLII MUSIC and PRO LOGIC modes
• When PLII CINEMA, PLII MUSIC or PRO LOGIC is selected in the 2-channel mode, more detailed parameters can also be set for the different
modes.
PLII MUSIC mode: Use the procedure described below to make the settings.
PLII CINEMA and PRO LOGIC modes: Refer to step 6 on pages 44 and 45.
• Program sources marked in parentheses
processing and played in the multi-channel mode.
q
Cinema (PLII CINEMA) mode: This mode is suited for movies and other Dolby Surround programs.
w
Music (PLII MUSIC) mode: This mode is suited for stereo music programs.
e
Pro-Logic (PRO LOGIC) compatible mode: This is the conventional Dolby Surround Pro-Logic mode.
1,3
1 At the 2-channel setting (page 41),
select PLII C, PLII M or PRO
LOGIC.
2
Set the surround
according to the selected mode.
• The parameters switch as shown
below each time the button is
pressed.
PL II CINEMA
DEFAULT
Downloaded From Disc-Player.com Denon Manuals
CH
1 2 3
ON
POWER POWER CH VCR
4 5 6
OFF
VCR POWER VCR POWER CH
VOL
7 8 9
CLEAR
TV
TV POWER TV POWER
CH TV/VCR SLEEP
CALL +10 0
DISPLAY RETURN INPUT MODE SURROUND
MENU
FUNCTION
1,3
ENTER
MODE
VOLUME
BAND
MUTE
CH SHIFT
NTSC/PAL STATUS
TU MEMO
SUB TITLE AUDIO ANGLE TOP MENU
PROG/DIRECT REPEAT A-B REPEAT RANDOM
CH.SELECT T.TONE SDB/TONE SURR.PARA
2
SETUP CDR/MD/TAPE TUNER/TV/VCR DVD
REMOCON MODE
Remote control unit
parameters
SURR.PARA
Remote control unit
PL II MUSIC PRO LOGIC
PANORAMA DEFAULT
DIMENSION

CENTER WIDTH

DEFAULT
and 2-channel sources (CDs, etc.) are decoded using Dolby Pro-Logic II
3
Set the various surround parameters.
• PANORAMA setting
PANORA ON OFF
ON
The selected setting ("ON" or "OFF") flashes.
• DIMENSION setting
DIMENSION 3
...
0
• CENTER WIDTH setting
CENTER WIDTH 0
...
0
• DEFAULT setting
DEFAULT
YES
If "YES" is selected, the settings are reset to the factory
defaults.
Once the surround parameters have been set, stop operating
buttons. After several seconds the display returns to normal and
the settings are automatically validated.
This completes the setting of the parameters.
NOTES:
• The 2-channel mode setting is stored in the memory for the
individual functions.
• It is not possible to play DTS digital input sources in the Dolby
mode.
OFF
, /
...
3 6
, /
...
4 7
, /
Y /N
/
Y N NO
, /
ENGLISH
43