Denon ADV-1000 Operating Instructions Manual page 78

ENGLISH
4
2 When "TV TYPE" is selected:
• MULTI
Select this when your TV is compatible with both the
NTSC and PAL formats.
NTSC signals are output from the video output jacks
when discs recorded in NTSC format are played, and
PAL signals are output from the video output jacks
when discs recorded in PAL format are played.
• NTSC (Factory default)
Select this when your TV's video format is NTSC.
If NTSC is selected, output format is fixed to NTSC.
• PAL
Select this when your TV's video format is PAL.
If PAL is selected, output format is fixed to PAL.
To exit the TV type mode
Press the ENTER button, you can go back to the
previous screen.
2 When "VIDEO OUT" is selected: (NOTE)
• PROGRESSIVE (Factory default)
Select this when using the ADV-1000 connected to a
progressive type TV.
• INTERLACED
Select this when using the ADV-1000 connected to
an interlace type TV.
To exit the video out mode
Press the ENTER button, you can go back to the
previous screen.
NOTE:
• For the component output only, it is possible to switch between interlace image output and progressive image output. It is not possible to
specify progressive image output for the Video output connectors or S-Video output connector.
78
Downloaded From Disc-Player.com Denon Manuals
TV V TYPE
Remote control unit
d
ENTER
SELECT :
Remote control unit
V I DEO O OUT
Remote control unit
d
ENTER
SELECT :
Remote control unit
B
TV TYPE
MUL T I
NTSC
PAL
DEC I S ION: ENTER BUTTON
V I DEO OUT B
PROGRESSIVE
I NTERL ACED
DEC I S ION: ENTER BUTTON