Toshiba RAS-15EKV-UL Service Manual page 97

No. Part name
n
Evaporator
(Heat exchanger)
o
Bearing
Procedures
4) Remove three fixing screw at the right
side of the heat exchanger, and separate
the heat exchanger from the back body.
(Figure 4, 5)
<How to assemble the heat exchanger>
Heat exchanger assembly on the back body,
and secure it using the fixing screw without
exchanger lock due to exchanger lock assemble
for protection affect when transpotation.
1) Follow to the procedure in the item
2) Remove the two screws used to secure the
bearing base.
3) Remove the bearing base.
<Caution at assembling>
• If the bearing is out from the housing, push it
into the specified position and then
incorporate it in the main body.
.
– 97 –
FILE NO. SVM-13070
One screw
(Figure 4)
Exchanger lock
Two screws
(Figure 5)
Two screws
Two
screws
Bearing base
Bearing
Bearing base
Bearing