Setting The Date And Time - Kodak EasyShare LS633 User Manual

Setting the Date and Time

Setting the Date & Time, First Time
The Date & Time have been reset message appears the first time you turn on
the camera or if the battery is removed for an extended time. (Select Cancel if
you want to set the date and time at a later time.)
delete
AUTO
OFF
Joystick/OK
Setting the Date & Time, Anytime
delete
AUTO
OFF
Joystick/OK
4
Press
next setting.
5
When finished, press the OK button.
6 Press the Menu button to exit the menu.
The setting remains until you change it.
NOTE: Depending on your computer operating system, Kodak EasyShare
software may allow your computer to automatically update the camera
clock when you connect the camera. See the Kodak EasyShare software
Help for details.
8
Chapter 1
1 With SET DATE & TIME highlighted, press
the OK button.
The Date & Time screen appears.
menu
2
Go to step 4 below,
review Anytime.
1
Turn on the camera. Press the Menu button.
2
Press
the OK button.
menu
3
Press
press the OK button.
review
The date format is YYYY/MM/DD. The time
Menu
is displayed in a 24-hour format.
to change the date and time. Press
Setting the Date & Time,
to highlight Setup, then press
to highlight Date & Time, then
to advance to the