Running A Continuous Slide Show Loop; Displaying Pictures And Videos On A Television - Kodak EasyShare LS633 User Manual

Running a Continuous Slide Show Loop

When you turn on Loop, the slide show is continuously repeated.

Displaying Pictures and Videos on a Television

You can display pictures and videos on a television, computer monitor, or any
device equipped with a video input. (Images may not look as good on a
television as on a computer monitor or when printed.)
NOTE: Ensure that the Video Out setting is correctly set to NTSC or PAL
(page 59).
Video
out
NOTE: If you connect or disconnect the audio/video cable while a slide show is
running, the slide show stops.
Chapter 4
1
On the Slide Show menu, press
highlight Loop, then press the OK button.
2
Press
OK button.
When you start a slide show, it repeats
until you cancel it by pressing the OK
button or until battery power is
exhausted. The Loop setting remains until
you change it.
1
Connect the audio/video cable (included)
from the camera video-out port to the
television video-in port (yellow) and
audio-in port (white). (See your television
User's Guide for details.)
The camera screen and speaker turn off;
the television screen acts as the camera
display.
2
Review pictures and videos on the television
screen.
to highlight On, then press the
to
47