Camera Ready Light Status - Kodak EasyShare Z700 User Manual

Camera ready light status

If...
Ready light does
not turn on and the
camera does not
work
Ready light blinks
green
Ready light blinks
red and camera
turns off
Ready light glows
steady green
Ready light glows
steady orange
Ready light blinks
orange
Ready light glows
steady red
www.kodak.com/go/support
Try one or more of the following
■
Turn on the camera
■
Recharge the battery or install a new one
■
Mode dial was on when battery was reloaded. Turn Mode dial off, then
back on.
■
Picture is being processed and saved to the camera. Camera is
operating normally.
■
Camera is connected. Camera is operating normally.
■
Recharge the battery or install a new one
■
Shutter button is pressed halfway down. Focus and exposure are set.
Camera is operating normally.
■
The Mode dial is set to Favorites. Camera is operating normally.
■
Flash is not charged. Wait. Resume picture taking when the light stops
blinking and turns off.
■
Auto exposure or auto-focus are not set. Release the Shutter button
and recompose the picture.
■
Camera's internal memory or card is full. Transfer pictures to the
computer (page
image storage locations
memory (page 3).
■
Camera processing memory is full. Wait. Resume picture-taking when
the light turns off.
■
Card is read-only. Change image storage location to internal memory
(page 36), or use a different card.
(page 2).
44), delete pictures from camera
(page 36), or insert card with available
Troubleshooting
(page 1).
(page 1).
(page 12), switch
51