Upgrading Your Software And Firmware; Additional Care And Maintenance - Kodak EasyShare Z700 User Manual

Appendix
Dirt on the battery contacts can affect battery life. Wipe the contacts with a clean,
■
dry cloth before loading batteries in the camera.
■ Battery performance is reduced at temperatures below 41
your camera in cold weather, carry spare batteries and keep them warm. Do not
discard cold batteries that do not work; when they return to room temperature,
they may be usable.
Visit www.kodak.com/go/z700accessories
Kodak EasyShare camera dock—powers your camera, transfers pictures to your
computer, and charges the included Kodak EasyShare Ni-MH rechargeable battery
pack.
Kodak EasyShare printer dock—powers your camera, makes
4 x 6 in. (10 x 15 cm) prints with or without a computer, transfers pictures, and
charges the included Kodak EasyShare Ni-MH rechargeable battery pack.
Kodak 3-volt AC adapter—powers your camera.
IMPORTANT: Do not use the AC adapter included with the Kodak EasyShare camera dock
or printer dock to power your camera.

Upgrading your software and firmware

Download the latest versions of the software included on the Kodak EasyShare
software CD and the camera firmware (the software that runs on the camera). See
www.kodak.com/go/z700downloads.

Additional care and maintenance

If the camera has been subjected to inclement weather or you suspect water has
■
gotten inside the camera, turn off the camera and remove the batteries and card.
Allow all components to air-dry for at least 24 hours before using the camera
again.
■ Blow gently on the lens or camera screen to remove dust and dirt. Wipe gently
62
°
F (5
for:
www.kodak.com/go/support
°
C). When using