Wiring Connection - Kenwood DPX791BH Instruction Manual

INSTALLATION / CONNECTION

Wiring connection

Antenna terminal
To front speaker (left)
To front speaker (right)
To rear speaker (left)
To rear speaker (right)
Ignition switch
Car fuse box
Battery
JS_KWD_DPX791BH_DPX501BT_KN_EN_4=F.indd 31
Rear, front, subwoofer output
White
White/Black
Gray
Gray/Black
Green
Green/Black
Purple
Purple/Black
Car fuse box
Red (Ignition wire)
Yellow (Battery wire)
Black (Ground wire)
To the metallic body or chassis of the car
When connecting to an external amplifier,
connect its ground wire to the car's chassis to
avoid damaging the unit.
MIC (Microphone input terminal) ( 15)
Fuse (10 A)
To the optional SiriusXM Vehicle Tuner
(commercially available) ( 12)
If no connections are made, do not let the wire come out
from the tab.
Brown
(Mute control wire)
Blue/White
(Power control wire/
Antenna control wire)
Light blue/yellow
(Steering remote
control wire)
Part list for
installation
(A) Mounting sleeve
(B) Trim plate
(C) Trim plate (only for
To connect the Kenwood
navigation system, refer
your navigation manual.
To the power control terminal
when using the optional power
(D) Wiring harness
amplifier or to the antenna
control terminal in the vehicle
(E) Extraction key
To the steering wheel remote
control adapter
Toyota car) (supplied
for )
31
ENGLISH
7/1/2015 4:09:40 PM