Bluetooth/Mobile Phone - Kenwood DPX791BH Instruction Manual

BLUETOOTH®
BLUETOOTH — Mobile phone
Receive a call
When there is an incoming call:
– All the buttons flash.
– The unit answers the call automatically if [AUTO ANSWER] is set to a selected time. ( 17)
During a call:
– The buttons and display illuminate according to the settings made for [DISPLAY]. ( 23)
– If you turn off the unit, the Bluetooth connection is disconnected.
To
Answer a call
Reject a call
End a call
Adjust the phone volume
[00] to [35] (Default: [15]*)
Switch between hands-
free and private talk
modes
* Not applicable for iPhone. During a call, the unit synchronizes the phone volume on the iPhone to the unit.
16
JS_KWD_DPX791BH_DPX501BT_KN_EN_2.indd 16
On the faceplate
Press or one of the
number buttons (1 to 6).
Press .
Press or
Turn the volume knob during a call.
• This adjustment will not affect the
volume of the other sources.
Press 6 during a call.
• Operations may vary according to
the connected Bluetooth device.
On the remote control
Press .
Press .
Press .
.
—
—
Improve the voice quality
While talking on the phone...
Press FNC to enter [FUNCTION].
1
2
Turn the volume knob to make a selection
(see the following table), then press the knob.
3 Repeat step 2 until the desired item is
selected or activated.
4
Press and hold to exit.
To return to the previous setting item, press
MIC GAIN –10 — +10 (–4): The sensitivity of
the microphone increases as the number
increased.
NR LEVEL –5 — +5 (0): Adjust the noise reduction
level until the least noise is being heard
during a phone conversation.
ECHO CANCEL –5 — +5 (0): Adjust the echo cancellation
delay time until the least echo is being heard
during a phone conversation.
.
Default: XX
10/11/2014 2:20:25 PM