Selecting The Destination By Entering Its Coordinates; Creating A Multi-Point Route (Inserting A Waypoint) - Alpine NVE-M300P Owner's Manual

NVE-M300P Navigation Module Owner's Manual

7.1.7 Selecting the destination by entering its coordinates

1. Tap the following buttons:
2. [optional] Tap
3. Tap the latitude or longitude value to change the coordinates.
4. Enter the coordinate values in WGS84 format on the keyboard: the latitude (N or S) and the
longitude (E or W).
5. Tap
6. The map appears with the selected point in the middle. Tap
then automatically calculated, and you can start navigating.

7.2 Creating a multi-point route (inserting a waypoint)

Multi-point routes are created from simple routes, so a route must be active first with your final
destination. The way of expanding the route is to keep the destination, and to add waypoints
(intermediate destinations).
1. Select a new location as you did in the previous sections. This will be the additional destination
in the route.
2. The map appears with the selected point in the middle.
3. Tap
4. Tap
destination of the route.
5. [optional] To add more points to the route, repeat the above steps as many times as you like.
If you insert a waypoint in a route that is already a multi-point route, you will automatically be taken to
the Edit Route screen where you can determine the position of the intermediate route point. When
you enter the screen, the new waypoint is placed as the first waypoint to be reached. The new point is
the highlighted point in the list.
You have the following options:
Button
The selected point moves up in the list (becomes a waypoint to be reached earlier). Tap
this button repeatedly, and the point becomes the start point of the route (when routing
from a given location) or the first waypoint to reach (when routing from the GPS
position).
The selected point moves down in the list (becomes a waypoint to be reached later).
Tap this button repeatedly, and the point becomes the final destination of the route.
Tap this button to optimise the route. The start point and the destination remain at their
position, but the waypoints are reordered to make the shortest possible route.
Tap this button to remove the selected point from the route. The route remains as it was
before adding the new point.
,
to change the format of the displayed coordinates.
.
.
to add the point as an intermediate destination preceding the final
,
Action
.
. The route is
37