Mazda MAZDA5 2006 Installation Instructions Manual page 19

2
SYSTEM POWER-UP
1. Verify that all connections are secure as per installation instructions.
2. Turn the ignition key to the RUN position.
3. Reconnect the negative battery terminal.
4. Turn the ignition key to the OFF position.
3
TACHOMETER PROGRAMMING
1. Tachometer Programming - Make sure engine hood is closed!
a. Turn the ignition key to the ON or RUN position.
b. Press and hold the brake pedal and programming button. After 10 seconds the horn will beep
3 times.
Continue holding the brake pedal and programming button for another 10 seconds.
c. Release & press and release the programming button a second time. The horn will beep 4
times.
d. Release the brake pedal.
e. Press and release the brake pedal. The horn will beep 1 time indicating option 1.
f. Press and release the brake pedal. The horn will beep 2 times indicating option 2.
g. Press and release the brake pedal. The horn will beep 3 times indicating option 3.
h. Press the START button on the transmitter one time.
i. Press and release the programming button a third time. The horn will beep 5 times.
j. Press and release the brake pedal. The horn will beep 1 time indicating option 1.
k. Press and hold the brake pedal. The horn will beep 2 times indicating option 2
(Tachometer Learn Mode).
l. Start the vehicle with the ignition key and let engine warm up to a normal idle rate. (Less than
1000 RPMs)
The horn will beep 1 time every 3 seconds indicating the system is monitoring the idle rate.
Continue holding the brake pedal while the engine is running and warming up.
m. Once the vehicle's engine has warmed up, press and release the programming button.
The horn will beep 4 times, indicating that the system has learned the current idle rate.
n. Release the brake pedal.
o. Turn the ignition key to the OFF position.
p. Proceed to Step 15 of the Mazda 5 Installation Instruction Manual to continue programming.
2
1032538 Rev. B 1/08