Making Settings In The "Volume" Menu - Blaupunkt NEW JERSEY 220 BT Operating And Installation Instructions

TA (traffi c information)
(only for reception area EUROPE)
Only possible in FM radio mode and with RDS
function switched on: Switching priority for traffi c
announcements on or off . Settings: ON, OFF.
u Press the rotary/pushbutton
the setting.
u Turn the rotary/pushbutton
between the settings.
If priority is switched on for traffi c information, the
display shows the symbol.
PTY (programme type)
(only for reception areas EUROPE and
AMERICA)
Only possible with activated RDS function: Select
a programme type.
u Press the rotary/pushbutton
programme types.
u Turn the rotary/pushbutton
programme type.
DX/LO (sensitivity)
Setting the sensitivity of station seek tuning. Set-
tings: DX (stations with strong and weaker signals
are found), LO (only stations with a strong signal
are found).
u Press the rotary/pushbutton
the setting.
u Turn the rotary/pushbutton
between the settings.
REGION (reception area)
Select the reception area for the radio reception.
Settings: EUROPE, ASIA, AMERICA.
u Press the rotary/pushbutton
the setting.
u Turn the rotary/pushbutton
between the reception areas.
Making settings in the "VOLUME"
menu
LAST VOL
If you enable LAST VOL, the volume which was
> set the last time you switched off the device is re-
to change
enabled at switch-on. Settings: ON, OFF (the value
10 is automatically set at switch-on).
>
to change
The power-on volume can be unexpectedly high
if the LAST VOL setting is selected and a high vol-
ume was set the last time the radio was switched
off .
Always set the device to a moderate volume.
>
to show the
u Press the rotary/pushbutton
the setting.
>
to select a
u Turn the rotary/pushbutton
between the settings.
BEEP (button beep)
Switching the confi rmation beep on or off . Set-
tings: ON, OFF.
u Press the rotary/pushbutton
>
to change
the setting.
u Turn the rotary/pushbutton
>
to change
between the settings.
TA VOL (traffi c information volume)
(only for reception area EUROPE)
Only possible with activated RDS function: Setting
the minimum volume for traffi c announcements.
Settings: 15 – 40.
>
to change
u Press the rotary/pushbutton
the setting.
>
to change
u Turn the rotary/pushbutton
volume.
Danger!
High volume
>
>
>
>
>
>
User settings
to change
to change
to change
to change
to change
to set the
17