CD/MP3/WMA/iPod mode
Connecting/removing a USB data
carrier
Connecting a USB data carrier
u Switch off the car sound system so that the
data carrier will be correctly registered.
u Insert the USB data carrier in the USB socket
;
.
u Turn on the car sound system.
If the USB data carrier is selected as audio
source, the data are read fi rst.
Notes:
• If the connected USB data carrier cannot
be seen, "ERROR" is briefl y displayed.
• The time required for reading in the data
depends on the design and size of the USB
data carrier.
Removing a USB data carrier
u Switch off the car sound system so that the
data carrier will be correctly unregistered.
u Disconnect the USB data carrier.
Selecting tracks
u Briefl y press the
/
to the previous/next track.
Note:
If the current track plays longer than 3 sec-
=
onds, pressing
Selecting a folder
(in MP3/WMA mode only)
u Press the DISPLAY button
until the
symbol is displayed.
u Briefl y press the
/
to the previous/next folder.
10
=
button
to change
once restarts the track.
2
repeatedly
=
button
to change
Fast searching
u Press and hold down the / button
until the desired position has been reached.
Interrupting playback
u Briefl y press the rotary/pushbutton
interrupt ("PAUSE") or continue playback.
Scanning all tracks
(not in iPod mode)
The scan function scans all available tracks.
u Briefl y press the
2 SCN
scanning.
"SCAN" and the scan time are shown on the
display during scanning.
u Briefl y press the 2 SCN button
continue listening to the track that is currently
being scanned.
Playing tracks in random order
u Press the 4 RDM button
the playback modes:
Opera-
Display
tion
CD
RDM ON
RDM DIR
MP3/
WMA
RDM ALL
ALBUM
iPod
SONG
Gen.
RDM OFF
If the RANDOM function is active, the
symbol appears on the display.
=
>
to
<
button
to start
<
again to
<
to change among
Meaning
Mixing tracks
Mixing tracks of
the current folder
Mixing tracks of
the data carrier
Mixing tracks of
the current album
Mixing tracks of
the current selec-
tion
Regular playback