Volume; Setting The Time; Traffi C Information; Radio Mode - Blaupunkt NEW JERSEY 220 BT Operating And Installation Instructions

Placing the device in operation | Traffi c information | Radio mode

Volume

Adjusting the volume
You can adjust the volume in steps from 0 (off ) to
50 (maximum).
u Turn the rotary/pushbutton
volume.
Muting the car sound system (Mute)
u Briefl y press the rotary/pushbutton
mute the device or to reactivate the previous
volume.
While it is muted, "MUTE" is fl ashing on the
display.

Setting the time

u Press the DISPLAY button
2 seconds to set the time.
u Press the
/ button
between hours and minutes.
The hour or minute display fl ashes if it is
selected.
u Turn the rotary/pushbutton
hours or minutes.
u Press the rotary/pushbutton
the time set.

Traffi c information

In the reception area "EUROPE", an FM station can
identify traffi c reports by means of an RDS signal.
If priority for traffi c reports is switched on, a traf-
fi c report is automatically switched through, even
if the car sound system is currently not in radio
mode.
If priority is switched on, the display shows the
symbol. "TRAFFIC" is displayed during a
switched-through traffi c announcement.
The priority is activated and deactivated in the
user menu (see the chapter "User settings", sec-
tion "Making settings in the "TUNER" menu", menu
item "TA").
6
>
to change the

Radio mode

>
to

RDS

Many FM stations broadcast an RDS (Radio Data
System) signal in addition to their programme
in the reception area "EUROPE" that allows the
following additional functions:
• The station name is shown on the display.
2
for approx.
• The car sound system recognises traffi c an-
nouncements and news broadcasts and can
=
automatically switch them through in other
to change
operating modes (e.g. in USB mode).
• Alternative frequency: If the AF function is
switched on, the car sound system automati-
cally tunes into the best receivable frequency
>
to set the
for the station that is currently set.
• Regional: At certain times, some radio sta-
>
to confi rm
tions divide their programme into regional
programmes providing diff erent content. If
the REGIONAL function is activated, the car
sound system changes only to those alternate
frequencies on which the same regional pro-
gramme is being broadcast.
The functions RDS, AF and REGIONAL are acti-
vated and deactivated in the user menu (see the
chapter "User settings", section "Making settings
in the "TUNER" menu", menu items "RDS", "AF" and
"REG").
Note:
The volume is increased for the duration of
the switched-through traffi c announcement.
You can adjust the minimum volume for
traffi c announcements (see the chapter "User
settings", section "Making settings in the
"VOLUME" menu", menu item "TA VOL").