6
Install the ink tank.
(1) Insert the front end of the ink tank into the Print
Head.
(2) Press on the
8
mark on the ink tank until the
ink tank snaps firmly into place.
(3) Make sure that the ink lamp lights up red.
~ Important
The machine cannot be used unless all the ink tanks
are installed.
*1
Make sure the position of the tank
matches the label.
7
Close the Inner Cover.
W
Note
Make sure that the Inner Cover is closed. Printing will
not start with the Inner Cover open since paper can not
be fed properly.
8
Gently close the Scanning Unit (Printer Cover).
A
Caution
• Be sure to hold the Scanning Unit (Printer Cover) firmly using both hands, and be careful not to
get your fingers caught.
• Do not hold the LCD or the Operation Panel.
W
Note
•
If the error message is still displayed after the Scanning Unit (Printer Cover) is closed, see
"Error Message Is Displayed on the LCD" on page 72.
• When you start printing after replacing the ink tank, Print Head Cleaning is performed
automatically. Do not perform any other operations until Print Head Cleaning finishes.
54
Routine Maintenance