Canon PIXMA MP960 Quick Start Manual page 113

Unpack the Machine
• Please confirm the included items against the illustration printed on the lid of the packing box.
• A USB cable is necessary to connect the machine with your computer.
QT5-0669-V01
1
Prepare the Machine
2
Install the Print Head
Print Head Nozzles
~
Important
If the Scanning Unit (Printer Cover) is left open
for more than 10 minutes, the Print Head Holder
moves to the right. Close and reopen the Scanning
Unit (Printer Cover) to return the Holder to the
center.
o
Firmly raise the Print Head Lock Lever
until it stops. The Print Head Lock
Lever may feel heavy.
Do not touch!
~Note
Do not touch the Print Head nozzles or the electrical
contacts.
o
Lower the Print Head Lock Lever
carefully.
o
Insert the Print Head.
.A
Caution
There may be some transparent or light blue ink
on the inside of the bag the print head comes in,
or the inside of the protective cap
c
this has no
effect on print quality. Be careful not to get ink on
yourself when handling these items.
() Remove the orange protective cap from
the Print Head and discard it.
o
Remove the Print Head from its
package.
Inner Cover Serial Number Location
~
Important
If an unintended language is displayed on the
LCD, press the Back button to return to the Lane
guage selection screen.
Once the message "Install the print head and
set the ink tank." appears, go to
O.
:i',Languageselection
~
Important
~ For your safety, always firmly grip the areas
illustrated when opening the Scanning Unit
(Printer Cover).
~ If the Document Cover is opened, you cannot
open the Scanning Unit (Printer Cover). Be sure
to open the Scanning Unit (Printer Cover) and the
Document Cover at the same time.
(1) Press the'" or"
.,wC""""'''''''''=''''===o1
button to select the
language.
(2) Press the OK C"""'"=~""~"C"="="'"'''"=",.~~=
button.
Use the
A
or • button on the
Operation Panel to select the language
for the LCD, then press the OK button.
o
Open the Inner Cover. Write down
the serial number located inside the
machine. You will need this to register
your product.
o
Open the Scanning Unit (Printer Cover)
until it locks into place. The Print Head
Holder moves to the center.
Caution
• Make sure to unlock the Scanning Unit (Printer
Cover) before turning the machine on.
@
Before transporting the machine, always lock
the Scanning Unit (Printer Cover) by moving the
Scanner Lock Switch towards the lock mark.
o
Open the Operation Panel, then press
the ON/OFF button to turn on the
machine.
Unlock the Scanning Unit (Printer
Cover).
(1) Open the Document Cover.
(2) Move the Scanner Lock Switch towards the
release mark to unlock the Scanning Unit (Printer
Cover).
WNote
To open the Paper Output Tray, put your finger on the
top of the tray and open it gently.
€)
Plug the power cord in the back of the
machine and connect the other end to
the wall outlet.
~
Important
Make sure that the Document Cover is closed.
o
Place the machine on a flat and
horizontal surface, and do not place
any objects in front of the machine.
Open the Sheet Feeder Cover, and
then pull the Paper Support. Open the
Paper Output Tray, and then open the
Output Tray Extension.
A
Caution
Before turning on the machine, remove all of the
shipping tapes.
~
Important
Do not connect the USB cable until after the son=
ware is installed.
'b
.§J
"8'
Part
ng·~
'Qj
States art