Canon PIXMA MP960 Quick Start Manual page 114

3
Install the Ink Tanks
4
Align the Print Head
Easy-Scroll Wheel
Turn the Easy-Scroll Wheel
left or right to easily select
a menu or a setting item.
For details, refer to "Basic
Operation for the Operation
Panel" in the Quick Starl
Guide.
*
You can also use the A,
. , ~,or ~ button to
select.
Cassette
For information on how to load paper
in the Cassette, refer to "Loading
Paper in the Cassette" in "Loading
Printing Paper" of the Quick Starl
Guide.
Hardware setup and Print Head
alignment is complete.
Extension
Paper Guide
-------
n:/l: _
~ ~
\$;3
~
ti'lM
--_
..
_--
_
..
__
..
~~
-------
I!M
~
. .
-------
- era., .. _
OK
WNote
• The pattern is printed in black and blue.
• When Automatic Print Head Alignment cannot be
executed correctly, the message "Auto head align
has failed." is displayed on the LCD. Refer to "Error
Message is Displayed on the LCD" in the User's
Guide on-screen manual.
Paper Guide
I
WNote
Print Head alignment takes about 6 minutes to
complete. Do not start another operation here.
The pattern is printed. And Print Head is aligned
automatically.
Make sure that Yes is selected in the.
message requesting head alignment,
then press the OK button.
Load a sheet of letter- or A4-sized
blank paper in the Auto Sheet Feeder,
align the paper with the right side of
the Cover Guide, then slide the Paper
Guide against the paper stack.
Pinch the Paper Guide and slide it to
the left end.
Refer to the color
guide on the Print
Head Lock Lever.
~
Electrical Contacts
~
Important
o
Do not touch the electrical contacts.
o
Do not touch the ink port.
€)
Insert the ink tank into the right-hand
slot and press the
8
mark on the ink
tank until it clicks into place.
If protective film is not removed
completely, problems with printing may occur.
o
Close the Inner Cover and the
Scanning Unit (Printer Cover).
~
Important
• For your safety, always firmly grip the areas
illustrated when closing the Scanning Unit
(Printer Cover).
G
The machine starts operating. Wait about 2
minutes until the machine stops making noi§e.
o
Make sure the ink lamp lights red.
o
Peel back the orange tab completely
and remove the plastic wrapper from
the ink tank.
o
Twist off and discard the orange
protective cap located on the bottom of
the ink tank.